Support-free
3MF + STL
Garden2 parts
Plant Support Clips
Snap-on clips that guide stems along a plant stake, for tomatoes, peppers, flowers and houseplants. The C-ring snaps around an 8 or 12 mm stake, while the stem sits loosely in an open 16 mm hexagonal eye so it is not pinched. Set of 10 (5 per size). Prints without supports.
- Largest part
- 40.5 × 20.4 × 8 mm
- Layer
- 0.2 mm
- Material
- PETG or ASA
€1.49incl. VAT
- 3MF
- STL
- Digitally checked for printability
- Prints without supports
- Download right after payment
- 3MF + STL in one ZIP
Digital product: STL and 3MF files, not a physical item. Pay with iDEAL, Bancontact, credit card or Apple Pay.
Colours in the photo
About this design
The Plant Support Clips guide stems along a plant stake, for tomatoes, peppers, flowers and houseplants. The C-ring snaps around the stake and the stem sits loosely in an open hexagonal eye. Your plant keeps growing without the stem being pinched, and there is nothing to tie.
- Two sizes: for 8 and 12 mm stakes, 5 clips per size
- 16 mm eye with an 8 mm opening for the stem
- Clips 37 and 41 mm long and 8 mm wide
- Prints without supports, digitally checked for printability
Print tips: print on the side, as supplied, so the ring flexes along the layers instead of snapping. 0.2 mm layers, 3 walls and 100% infill. Use PETG or ASA outdoors; PLA softens and turns brittle in the sun. Print as many as you need.
You get two STL files and one 3MF.
Parts and dimensions
Dimensions w × d × h, each part checked separately.
-
plant-support-clip-8.stl
- Dimensions (w × d × h)
- 37 × 20.4 × 8 mm
- File
- 49 kB
-
plant-support-clip-12.stl
- Dimensions (w × d × h)
- 40.5 × 20.4 × 8 mm
- File
- 50 kB
You get all files together in one ZIP.
- plant-support-clip-12.stl50 kB
- plant-support-clip-8.stl49 kB
- plant-support-clips.3mf25 kB
40 layers of 0.2 mm (plant support clip 8, 8 mm tall)
Print settings
- Layer height
- 0.2 mm
- Walls
- 3
- Infill
- 100%
- Supports
- Not needed
- Material
- PETG or ASA
Designer's tip
Print on the side as supplied, so the ring flexes along the layers. Print 5 of each size, or more if you have more stakes. Use PETG or ASA outdoors; PLA softens and turns brittle in the sun. Measure your stake: the clips fit 8 and 12 mm stakes.
Frequently asked questions
Which stakes do the clips fit?
Round plant stakes of 8 mm and 12 mm, in bamboo, wood or plastic. Measure your stake and pick the size that fits.
Does the clip pinch the stem?
No, the stem sits loosely in a 16 mm hexagonal eye. It is guided, not clamped.
Can I move the clips later?
Yes, unclip the ring, slide it up and snap it back on as the plant grows.
License at a glance
You may
- Print for yourself, your family and as a gift
- Sell printed copies in small quantities
You may not
- Resell or share the files
- Upload the files to other platforms
Read the full license For digital content, the right of withdrawal ends once you agree to immediate delivery at checkout. Right of withdrawal
